Product Categories

Handheld Laser Cleaning Machine

[22]

Robot Plug

[6]

Contact Now

Fangyu(shanghai)Automation Technology Co.,Ltd

City:shanghai

Province/State:shanghai

Country/Region:china

Contact Person:MrsLiling

View Contact Details

Contact Now

IP68 IP69 Robot Plug Pluggable Wet Cable Wire Robot Connector

Name: IP68 IP69 Robot Plug Pluggable Wet Cable Wire Robot Connector
Brand: FANGYU
Price: 1 USD

Ask Latest Price

Video Channel

Place of Origin :Shanghai,China

Brand Name :FANGYU

MOQ :1 unit

Price :Price negotiable

Delivery Time :7-10 days

Payment Terms :TT

Supply Ability :goods in stock

Model Number :YS-BH-8F YS-IL-8M

Type :BNC, subsea connectors

Application :Power,Automotive

Voltage rating :300 V (resistance to voltage is greater than 1500V 60s)

Insulation resistance :> 1000 mΩ(room temperature)

Rubber diameter :15.75mm

Contact Now

Add to Cart

View Product Description

Rovmaker Pluggable Wet Cable Wire Robot Subsea Connectors IP68 Ip69 of Underwater Plug and Underwater Socket

Product Description

Specification

STRUCTURE	MATERIALS AND SPECIFICATIONS
Main	The seawater corrodes stainless steel
Install screw	7/16-20 UNF thread length is 15/19mm
Socket head	Neoprene (special mixing rubber for underwater connector)
Contact Pin	Gold-plated copper alloy, American standard pin
Positioning pin	303 stainless steel (2 needle Ø 3.2, 3/4 needle Ø 2, 5/6/8 needle don't need)
O-rings	Nitrile rubber, the imported o-rings, parker 2-014, Ø 12.42 x 1.78
Locking lid	Polyformaldehyde resin (POM)
Cable plug body	Special polyether
Install line	Teflflon, silver-plated pure copper.
End cap	Neoprene (special mixing rubber for underwater connector)
Cable plug	Pressure-resistant seawater special cable.

TECHNICAL PERFORMANCE

ITEM	RATING VALUE
Depth	0~1000 meters
Voltage	300V (resistance to voltage is greater than 1500V 60s)
Working current	2A~16A
Insulation resistance	> 1000 m Ω (room temperature)
Wet insertion frequency	> 500 times
Working temperature	(-4~60)°C

FY Can provide complete robot pre-sales, in sales, and after-sales services
Leading technology, meticulous management, honest service, and customer first

At present, the company produces dozens of series and thousands of specifications of products, providing customers with a wealth of products. The company has passed ISO9001 quality management system certification, most products have passed CE certification, and all products meet ROHS environmental protection requirements.

PRECAUTIONS

Always apply grease before mating.

* Disconnect by pulling straight, not at an angle.

* Do not pull on the cable and avoid sharp bends at cable entry.
* When using a bulkhead connector, ensure that there are no angular loads.
* All kinds of connectors should not be exposed to extended periods of heat or direct sunlight.

Greasing and mating above water (dry mate) :

* Connectors must be greased with Molykote 44 Medium(recommended brand) before every mating.

* A layer of grease corresponding to a minimum 1/10 of socket depth should be applied to the female connector.

* The inner edge of all sockets should be completely covered, and a thin transparent layer of grease left visible on the face of the connector.

* After greasing, fully mate the male and female connector in order to secure optimal distribution of grease on pins and in sockets.

* To confirm that grease has been sufficiently applied, de-mate, and check for grease on every male pin. Then re-mate the connector.

Greasing and mating underwater (wet mate) :

* Connectors must be greased with Molykote 44 Medium(recommended brand) before every mating.

* A layer of grease corresponding to approximately 1/3 of socket depth should be applied to the female connector.

* All sockets should be completely sealed, and a transparent layer of grease left visible on the face of the connector.

* After greasing, fully mate the male and female connector and remove any excess grease from the connector joint.

Cleaning

* General cleaning and removal of any accumulated sand or mud on a connector should be performed using spray based contact cleaner (isopropyl alcohol).

* New grease must be applied again prior to mating.

Use of Loctite

For locking metallic connectors, the use of Loctite 243 is recommended.

INSTALLATION REQUIREMENTS

1. End surface roughness requirements Ra1.6 in the diameter of the screw hole around 25mm when threaded hole installation.

2. Hole diameter should be between Ø 11.2 ~ Ø11.4 mm and roughness requires Ra1.6 in the diameter of the screw hole around 25mm when through-hole installation.

3. Before installing, make sure to apply a thin layer of silicone oil to the o-ring, not too thick.

Product Tags: